bonding force

The properly production of B_2O_3 benefited in the formation of chemical bonding force at bonding interface and resulted in the increase of adhesive ability.

适量B2O3的形成有利于在粘接界面处形成化学键合力，从而提高界面粘接能力；

The first step is to model the close loop control system of wire bonding force.

两步走的策略被采用：第一步，建立键合力控制系统的闭环模型；

The result showed that sand ejection treatment could get proper bonding force.

结果显示，在一般情况下喷砂处理即可达到较高的粘结强度。

Because it does not exist strong bonding force between alumina nitrate and calcium carbonate, the preparation of alumina tube with alumina nitrate using nano-calcium carbonate as template is not feasible in experimental conditions.

实验结果表明：由于纳米碳酸钙和硝酸铝之间不存在较强的结合力，所以在本文的工艺和实验条件下，以纳米碳酸钙为模板制备氧化铝空心管的方法是不可行的。

The bonding force between the Cu deposition and substrate can reach 5B grade even after the thermal shock test and the cut by using high-speed grinding wheel of the QFN process.

镀铜层与基底间的结合力可以达到5B级，在经过热冲击试验和QFN封装工艺的高速砂轮线切割操作后，结合力都达到5B级。

The Optimization Design of Wire Bonding Force Control System

引线键合力控制系统的优化设计

Using acetylene torch to make tin pewter welding rod melting and bonding with the tin surface to improve the bonding force.

采用氧乙炔火焰将锡锑轴承合金焊条熔化结合在锡表面，以提高两者的结合力。

Many factors have important effects on the controlling performance of bonding force system.

所以，引线键合的质量和可靠性很大程度上取决于键合力控制的性能。很多因素都对键合力控性能有很大的影响。

The Mo's bonding properties can be reflected by two aspects of the H-F force vector, size and direction.

H-F力的矢量特性从数值和方向两方面反映了分子轨道的成键性质。

Through verifying, there exist strong bonding force oxide attached on inside and outside wall of low-temperature superheater tubes, and ashes are deposited between tubes, which result in producing thermal deviation.

经检验，低温过热器管内、外壁附着结合力较强的氧化物，管间积灰，导致热偏差产生。

The h-f force method to describe the mo's bonding property

描述分子轨道成键性质的H-F力方法

The Mechanism Formed the Bonding Force between New and Old Concrete

新老混凝土界面粘结力形成机理

And the content of chromate and polyvinyl alcohol also affect the bonding force between the coating and matrix.

涂液中铬酐和聚乙烯醇的含量还影响涂层与基体之间的结合力，必须适当控制。